Dry absorption of environmental protection under the platform
|
DESCRIPTION
|
RIP dry platform in the absorption of environmental protection under the CNC cutting machine to install ventilation work platform, platform along the length of the average divided into a number equal to the width of the ventilation room, a ventilation in each room has a ventilation that can be collected and the ash hopper, Ventilation in each room of the end of the design of a CRC / closure of the cylinder throttle, when the cutting machine to the cutting head of each room ventilation at the top, through the sensors will automatically switch the cylinder throttle open, will be cut in the dust Inhalation platform, cross-wind, through the competent Road into the final purification system.
Range of application
Machine machinery, engineering machinery, motorcycles, aviation, elevators, and other industries
|
FUTURE
|
1, Each divided into four platform-independent ventilation room,
greatly reducing the consumption of the handling of the wind,
equipment costs and reduce the cost of branches.
2, Cutting the big high-temperature dust particles of dust, by
special design of the platform so that a lot of flying in the
settlement of particles and ash in the bucket.
3, Cutting platform is modular in design, according to the different
needs of customers free combination.
4, Cutting the side of the platform with the induction cylinder
throttle and wind Road, and the door shelves in the cutting
machine-door design with a mobile control hoist cylinder
throttle, thereby effectively collect dust.
5, Cutting platform on the rack, is to take modular design, rack
under MOUNTING. Racks use a certain thickness of the plate,
inserted in the supporting frame bed, can not be a slight
movement, and the replacement of convenience.
6, Environmental platform, according to the CNC cutting machine
for supporting selection.
7, According to the environmental platform, the different
requirements for non-standard design. |
| Single side and downdraft environmental platform and dust removal system |
| |
 |
| |
Applicable to equal or lesser than 3m wide cutting platform
|
| |
| Both sides and downdraft environmental platform and dust removal system |
| |
 |
| |
Applicable to 3-5m wide cutting platform and two-level filter plus pre-cyclone pre-processor
|
| |
 |
|
 |
|
 |
| |
|
|
|
|
| Control shelves following cutting machine mast. |
|
Induction cylinder throttle . |
|
Wind Road in the design guide. |
PARAMETERS
Standard modular platform parameters ：
Width：1600mm
2100mm
2600mm
3100mm
Length：2000mm
Forexample：Plasma cutting machine for the span of 5m，Length：8000mm
Choice of modular combinations：2100mm，4 blocks；2600mm，4 blocks.
|
